How Did Emission Rules Evolve from Euro 1 to Euro 7?

In 1992, a passenger car emitted roughly five times more carbon monoxide from its exhaust than a vehicle today. In just over three decades, the diesel NOx limit fell from 0.500 g/km to 0.080 g/km; that squeeze could not have been met without successively adding components such as the catalytic converter, OBD, DPF, SCR and GPF to the exhaust line. The evolution of emission rules from Euro 1 to Euro 7 is really a history of technology: each step, along with a drop in the limit table, added another new part to your car. This page brings that entire timeline together in one place.
How do emission standards work?
European emission standards regulate the pollution produced by new road vehicles sold in EU and EEA member countries and in the United Kingdom; over time they have also come to cover non-exhaust sources such as brake dust and tire wear. The rule set is based on a series of amendments to the 1970 directive 70/220/EEC; the latest step, Euro 7, is regulation 2024/1257/EU.
Two basic principles remain the same at every stage. First, new vehicles that do not meet the standard cannot be sold on the market; but the rules apply only to new type approvals and new registrations, and are not applied retroactively to vehicles already on the road. Second, the legislation does not mandate a specific technology: how you comply is left to the manufacturer's decision. Still, once the limits fall below a certain level, in practice only one solution remains, and that technology becomes established across the industry.
Highlights
- Euro 1, which began in 1992, effectively made the three-way catalytic converter mandatory in passenger cars.
- The diesel NOx limit was 0.500 g/km at Euro 3 and fell to 0.080 g/km at Euro 6.
- In 2017, the RDE test, which measures emissions outside the laboratory on real roads, came into effect.
- Euro 7 takes effect with new type approvals in November 2026; exhaust limits stay at Euro 6 levels, while it moves on to brake and tire particles.
Timeline: when did each stage arrive?

Approval dates for passenger cars follow a clear sequence. Euro 1 was approved in July 1992, and the first registrations began in January 1993. Euro 2 came into force in January 1996, Euro 3 in January 2000, and Euro 4 in January 2005. Euro 5 arrived in two steps: 5a in September 2009, 5b in September 2011. Euro 6, meanwhile, turned into a chain of sub-stages, starting with 6b in September 2014 and extending through 6c and 6d-Temp (2017), 6d (January 2020), 6e (September 2023) and 6e-bis (January 2025). Euro 7 was finalized with the approval of EU countries in April 2024; it applies to new vehicle types from November 2026 and to all new registrations from November 2027.
These dates directly determine which rule set your car was built to. A 2007 model diesel is Euro 4, a 2013 model diesel is Euro 5b; a gasoline vehicle registered after 2021 is most likely Euro 6d. Since there is a difference between the approval date and the registration date, the exact classification of vehicles in boundary years is made from the registration certificate.
How did the limits fall generation by generation?
Numbers are the real language of the standards. On the diesel side, the carbon monoxide (CO) limit was 2.72 g/km in Euro 1; it fell to 0.66 in Euro 3 and 0.50 in Euro 4, and stayed at that level. NOx was tied to a separate limit for the first time in Euro 3: 0.500 g/km. Euro 4 brought it down to 0.250, Euro 5 to 0.180, and Euro 6 to 0.080 g/km. Particulate mass (PM) fell from 0.14 g/km to 0.08 in Euro 2, to 0.005 in Euro 5a, and to 0.0045 g/km from Euro 5b onward.
For petrol engines, the CO limit was around 2.2-2.3 g/km during the Euro 2-3 era, and was fixed at 1.0 g/km with Euro 4. NOx fell from 0.150 in Euro 3 to 0.080 in Euro 4, and to 0.060 g/km from Euro 5 onward. For petrol engines, there was no PM limit at all until Euro 4; direct-injection (GDI) engines became subject to the 0.0045 g/km limit in Euro 5/6. An important milestone is the particulate number (PN) limit: expressed in units of x10^11/km, this limit came to diesel in 2011 with Euro 5b, and to petrol in 2014 with Euro 6.
| Generation | Effective (approval) | Diesel NOx (g/km) | Key technology it introduced |
|---|---|---|---|
| Euro 1 | July 1992 | No limit | Three-way catalytic converter |
| Euro 2 | January 1996 | No limit | Converter improvements |
| Euro 3 | January 2000 | 0.500 | OBD, NEDC test with cold start |
| Euro 4 | January 2005 | 0.250 | Diesel particulate filter (DPF) |
| Euro 5 | September 2009/2011 | 0.180 | PN limit (5b), widespread adoption of DPF |
| Euro 6 | September 2014 | 0.080 | SCR/AdBlue, petrol GPF |
| Euro 7 | November 2026 | 0.080 (same) | Brake PM limit, durability rules |
What did each stage add to the exhaust line?
Catalytic converter: the de facto requirement of Euro 1
Euro 1's limits could not be met in petrol passenger cars without a three-way catalytic converter; in other words, from 1992 onward this component became de facto mandatory. The three-way converter is the fundamental aftertreatment unit that chemically converts CO, hydrocarbons and NOx in the exhaust gas simultaneously, and it remains the first stage of the line today.
OBD: the vehicle's self-inspection
OBD (on-board diagnostics) is the vehicle's ability to diagnose and report its own emission-related systems. In the EU, computerized onboard diagnostics were made mandatory in connection with emission standards; from the Euro 3 era onward, vehicles carry this inspection systematically. In the US, OBD II was required for petrol passenger cars and light trucks from 1996 onward. Thanks to OBD, when a sensor or aftertreatment component fails, the Check Engine warning comes on and a fault code is recorded.
DPF: the filter that physically traps soot
The diesel particulate filter (DPF) is a ceramic, honeycomb-structured filter in the exhaust line; it physically traps soot and particulates. The sharp drop in PM limits during the Euro 4-5 era made this filter standard equipment for diesel vehicles. As the filter fills up, the accumulated soot must be burned off; this is called regeneration, and the goal of the strategy is to prevent unnecessary fuel consumption and damage to the filter itself. Regeneration cannot be completed during short, city driving; An EGR failure leads to excessive soot buildup, and an empty additive tank also disrupts the process. These are the main causes of DPF clogging.
SCR and AdBlue: Chemically breaking down NOx
Euro 6's 0.080 g/km diesel NOx limit added yet another link to the exhaust aftertreatment chain: SCR (selective catalytic reduction). This system injects AdBlue into the exhaust line; AdBlue is a 32.5% purity urea solution. In the SCR catalyst, NOx is converted into nitrogen and water. The order is clear: exhaust gases first pass through the catalytic converter and DPF, then reach the SCR catalyst; the DPF targets particulate matter, while the SCR targets NOx. When the AdBlue system fails, the vehicle cannot maintain emission compliance and the engine management initiates a power restriction.
GPF: the need for a filter on the gasoline side
On the gasoline side, the problem was created by gasoline direct injection (GDI) engines: tests showed that GDI engines without a GPF emit more fine particles. To meet Euro 6 PN targets, DPF-based wall-flow technology was adopted and the gasoline particulate filter (GPF) was integrated into the exhaust system. Today, a GPF is standard on Euro 6d GDI vehicles.
Test cycles and the real-world problem
From Euro 3 onwards, emissions were measured in a laboratory cycle called NEDC using the cold start procedure. The problem was this: vehicles tuned to NEDC did not behave the same in real traffic. In an independent measurement conducted in 2014, the real-world NOx emissions of 15 Euro 6 diesel passenger cars came out at around seven times the limit on average. In the dieselgate scandal of 2015, it emerged that vehicles emitted up to 40 times the permitted NOx in the real world while passing the test; subsequent reports showed that the problem extended to all major manufacturers and that around 90% of diesel vehicles violated the rules. A defeat device is explicitly prohibited under EU law.
The response came in two stages. In 2017, the laboratory test was replaced with WLTP, and RDE (real driving emissions) testing became possible on the road using portable emissions measurement systems (PEMS). Initially, a conformity factor was granted for NOx; this factor was reduced to 1.5 in 2021. Environmental organizations argued the tolerance was too high, while the manufacturers' association argued that compliance in such a short time was difficult; the ultimate goal is for the measurement to be carried out completely without limits, that is, with 100% conformity.
What difference is Euro 7 bringing compared to the previous stage?
The most common misconception is that Euro 7 further tightens exhaust limits. That is not the case: in passenger vehicles, Euro 7's tailpipe emission limits remain the same as Euro 6. The real change is in the scope of measurement. For the first time, a limit is being introduced for brake-related PM10 emissions: 0.007 g/km (0.003 g/km for electric vehicles). This is a step consistent with the prediction that, by 2030, the brakes of fossil-fueled vehicles could be dirtier than those of electric vehicles; because regenerative braking reduces brake pad wear in electric vehicles.
Evaporative emissions are also being tightened significantly for the first time: for gasoline M1 and N1 vehicles, the limit drops from the 2.0 g/test value in Euro 6 to 1.5 g/test. On the durability side, M1 and N1 vehicles must maintain emissions compliance throughout their main lifetime, that is, for 160,000 km or 8 years; depending on the category, this period can extend up to 200,000 km or 10 years. Euro 7 also introduces strict real-driving emissions monitoring. The transition is slower for heavy-duty vehicles: new models 4 years after the regulation takes effect, and all new vehicles 5 years after.
In summary, the clear answer to the question is this: the road from Euro 1 to Euro 6 was paved by lowering exhaust limits with each generation and, in parallel, adding the catalytic converter, OBD, DPF, SCR/AdBlue and GPF to cars; Euro 7, meanwhile, keeps the limits at Euro 6 levels and moves oversight beyond the exhaust - to brake and tire particles, evaporation, and durability over the vehicle's lifetime. Knowing your vehicle's production period also means knowing which components are in the exhaust line and what the likely failure points are.