How Should a Seller Read the Inspection Report?

When it comes to inspection reports, everyone thinks of the party buying the vehicle. Yet this piece of paper matters just as much to the person sitting on the other side of the table as it does to the buyer. If you are the seller, that report is the map of the negotiation: you read from it which item you will concede on, which line you will defend, and where you will genuinely lose money. In this guide, we analyze the report line by line from the seller's perspective and explain each item that will be useful in a valuation negotiation.
Who Is an Inspection Report Mandatory for, and When Is It Obtained?
Let's clarify the framework first. The Regulation on the Trade of Motor Vehicles, published in the Official Gazette on August 27, 2024, re-regulated the inspection report and repealed the old 2018 regulation. The requirement applies to M1, M1G, N1, and N1G class vehicles that do not exceed 8 years of age and 160,000 km. The obligation rests with the authorized dealership; presenting a report is not legally mandatory in a notarized sale between two individuals. Still, having the report is in the seller's favor: it gives the buyer transparency and becomes your only leverage at the negotiating table.
In commercial sales, the report must be obtained within 10 days before the sale. The "3-day rule" circulating on the internet dates back to the old regulation and is no longer valid; don't fall for it. The report is issued in three copies, two copies remain with the seller's business, and the business is required to keep the report for at least 5 years. If the sale does not take place for a reason attributable to the buyer, the report fee belongs to the buyer; in other cases, it belongs to the business. Additionally, for young and low-mileage vehicles sold by an authorized dealership, the engine, transmission, and electrical-electronic systems are covered by a warranty of 3 months or 5,000 km from the date of sale; faults are required to be fixed within a maximum of 45 business days.
Highlights
- In a commercial sale, the report must be obtained within 10 days before the sale; the 3-day rule belongs to the old regulation.
- Factory paint is generally in the 90-140 micron range; consistency between panels matters more than an absolute threshold.
- The absence of an insurance damage record does not mean the car is undamaged; repairs paid for in cash leave no trace in the system.
- Bumper paint and localized paint on a single panel have a limited effect on the price; chassis and pillar work, however, is the main heading of the valuation.
Reading the Paint Thickness Lines Correctly

The most debated section of the report is the paint thickness measurements. As a rough guide, the 90-140 micron range is considered factory original; 140-250 micron suggests the possibility of localized paint or a small repair, while above 250 micron indicates that the panel has been repainted and that filler or putty may be underneath. However, don't fall into the trap of memorizing these figures. Factory paint thickness varies by make, model, and even by panel. What really matters is consistency between panels.
The interpretation rule you need to know as a seller is this: a single panel reading high usually points to minor incidents like parking scratches and is a defensible stronghold in the negotiation. On the other hand, several adjacent panels being raised at once raises the possibility of a serious impact; trying to downplay this undermines your credibility.
What Do the Terms in the Report Mean?
Knowing the meaning of the abbreviations in the reports allows you to accurately tell the story behind the line: original means the factory paint has been preserved; painted means the entire panel was repainted later; locally painted means only a section was painted; replaced indicates that the part was replaced with a new one. "Remove and refit" means the same part was removed and installed again; this is usually the trace of service operations, not an accident. In the report, A stands for heavy processing, B or BI for paint work, D for replacement, DM for existing impact damage, and C for scratch. One more note: the green-yellow-red color coding in the reports is not a legal standard, it is a company preference; two businesses may mark the same finding with different colors. The real information lies in the lines beneath the color.
Tramer Record: The Seller's Most Misunderstood Item
A Tramer record is created when a repair is filed through a comprehensive or traffic insurance policy. Most sellers miss the subtlety in between: repairs paid in cash and done in the workshop leave no trace in the system. Therefore, seeing "no Tramer record" in the report does not mean the vehicle is undamaged, and do not hand over a vehicle to a buyer claiming otherwise. You can query the record via tramer.org.tr using the plate or chassis number, through e-Devlet (only for vehicles registered in your own name), by sending a text message to 5664, or with the TRAMER mobile application. Do this query yourself before the sale; having the information beforehand that the buyer will find determines your position in the negotiation.
If there is a recorded damage history, do not be evasive. The buyer will see this record anyway, and a high damage record lowers the price. What you should defend here is the nature of the record: the amount, the location of the damage, and where the repair was done are more decisive than the existence of the record. The report, TRAMER record, inspection, and service records should all tell the same story; if there is a contradiction between them, it falls to the seller to explain it with documentation. A heavy damage record is a different league: if post-accident repair costs come close to the vehicle's value, the vehicle is treated as heavily damaged, and this record directly affects market value, credit, and insurance processes. With such a record, you have to set your price expectations realistically from the start.
Mileage and Fault Codes: What Is and Isn't Defensible in the Report
Mileage consistency is assessed by the inspector comparing steering wheel, gear knob, pedal rubber, and seat wear with the odometer value. This observation alone is not sufficient for a definitive judgment, but it triggers a cross-check. If a suspicion of mileage inconsistency has arisen, your strongest card in hand is the maintenance records; do not proceed without documentation.
The mechanical section covers engine compression, transmission behavior, suspension, brake pad and disc condition, and the fault codes read by the diagnostic device. The seller experience comes in handy at two points. First, not every fault code is an urgent problem; what matters is whether it is an active fault, that is, whether the system detects a problem at that moment. Second, erased fault codes or completely reset readiness indicators may indicate that the memory was wiped shortly before the inspection. If your vehicle has no such condition, object to it, ask for it to be used and request a second scan; a persistent problem will come back within a few drive cycles anyway. Such interventions, which you are already confident about, are also the easiest way to keep the report transparent.
Which Finding Actually Lowers the Price?
Here is the real issue: which lines in the report require making concessions in negotiation, and which are actually defensible? Giving exact percentages would not be right; the impact varies by brand, model, the vehicle's age, and the location of the finding. But knowing the order of weight of the items lets you know what you are defending at the table.
| Report Finding | Impact on Price | Seller's Stance |
|---|---|---|
| Local paint on a single panel | Limited | Defensible, does not make a noticeable difference in the offer |
| Plastic bumper paint or replacement | Very limited | Often not even included in the value loss calculation |
| Replacement of removable parts such as fenders or doors | Moderate | The impact remains limited if workmanship quality is good |
| Multi-panel paint spread across the vehicle | Noticeable | Reflected in the offer as a clear difference |
| Work on the roof, pillars, or structural components | High | It is the main item in valuation and should be disclosed in advance |
| Chassis repair, pulling, or welding | Very high | May be the single item that determines the price |
The logic of this table is simple: the number of painted parts alone is not decisive; the nature and reason of the work matter. The bumper is a part designed to absorb impacts; painting or replacing it does not touch the core of the vehicle and is not even considered in most value loss calculations. In contrast, work on the roof, pillars, and chassis directly affects the vehicle's safety performance; these findings are not items to be disputed, but things that must be discussed openly and honestly from the start. A practical note: paintless dent repair does not compromise originality and does not create value loss; do not panic and slash the price over a minor dent.
What Should You Pay Attention to When Presenting the Report to the Buyer?
While the report is in your hands, the documents you should keep are: the report itself, fault code and battery printouts, and test drive notes. These papers are your reference both in a second sale and in a possible dispute. When presenting to the buyer, proceed with three principles: disclose known defects yourself, document everything that can be documented, and stand firm on defensible items. Brake, tire, and maintenance items are calculable expenses; if they are resolved before the sale, the figure comes back to you; if not, it comes to the table as a discount item in negotiation. The choice is yours.
There is also a way to object to the report. An insurance expert report is not a settlement agreement; after signing, objection is possible on grounds of technical error or hidden damage, and if the objection is rejected, the insurance arbitration commission can be applied to. For a flawed inspection report, the consumer arbitration board and the courts are open routes against the inspection firm. Objections to a depreciation expert report, after July 1, 2026, are made within 3 business days via EKSIST; knowing this deadline in post-sale processes prevents loss of rights.
Summary: The Seller's Relationship with the Report Is Built on Transparency
Let's briefly summarize: reading the inspection report as a seller means distinguishing which line is bargaining material and which one creates real loss of value. Items such as bumper paint and local paint on a single panel can be defended; structural components and chassis work are unavoidable. The absence of a TRAMER record is not proof of damage-free condition, but the existence of a record is not the end of everything either; its nature and documentation are what matter. Connect your TRAMER record with the information in the report, along with your inspection and service records, and explain any contradictions in advance. In the past, the report was the buyer's weapon against the seller; today, when read correctly, it is the seller's strongest bargaining tool. The difference lies in knowing how to read it.
Sources
- How to Read an Inspection Report? A Step-by-Step Guide
- How to Read a Vehicle Inspection Report?
- TRAMER Query
- Can a Vehicle Be Sold Without an Inspection Report?
- How to Read an Inspection Report? Check These Details When Buying a Car
- Does dent repair reduce the car's value?
- Objection to Depreciation Expert Report After July 1, 2026