What Are NEDC and WLTP? The Difference in Range and Fuel Consumption

An electric car promising 535 km of range in the brochure may only deliver 444 km on the same road in real life. A similar picture applies to fuel consumption: the figures on paper and the results at the pump often do not match. The source of this gap lies not in the vehicle, but in the test procedure from which the vehicle's values are produced. The transition from NEDC to WLTP targets exactly this gap; but without understanding what each of them measures, it is impossible to correctly interpret what the number in the brochure means.
NEDC: The Old Test Cycle That Set the Rules for Thirty Years

NEDC (New European Driving Cycle) was a standardized test cycle with roots in the 1970s, used from 1992 onward in the European Union to produce comparable fuel consumption values. When viewed not as a mid-July showroom display but as a cold engineering reality, its fundamental problem is clear: the cycle lasts only 20 minutes and most of the speed falls within the 50 km/h band. Air conditioning off, no hills, and no real-world equivalent of aerodynamic load.
An even more striking detail is the origin of the cycle. NEDC was not a procedure designed for CO2 and consumption measurement; these measurements were later added to its scope. In other words, the consumption values you saw in car brochures for decades came from a test that was never actually developed for this purpose. The result? It was measured that consumption values under NEDC could be up to 50% lower than real driving conditions, and the gap between type approval and real-world use kept widening over the years.
WLTP: A Longer, Faster and More Vehicle-Specific Test
WLTP (Worldwide Harmonised Light Vehicles Test Procedure) is a global test standard that came into force on September 1, 2017. It measures pollutants, CO2 emissions, fuel or energy consumption, and range. The process of replacing NEDC was completed in two stages: From September 1, 2017, WLTP values became mandatory for new type approvals, and from September 1, 2018, for all newly registered passenger cars and light commercial vehicles.
The numbers clarify the structural difference between the two cycles:
| Feature | NEDC | WLTP |
|---|---|---|
| Duration | 20 minutes | About 30 minutes |
| Distance | 11 km | About 23 km |
| Average speed | Significantly lower | 46.5 km/h |
| Maximum phase speed | Weighted toward about 50 km/h | 131.3 km/h in the Extra High phase |
| Ambient temperature | - | 23°C |
| Vehicle parameters | Limitedly taken into account | Includes mass, aerodynamics, rolling resistance, and auxiliary energy consumption |
The WLTP cycle consists of four phases: Low (maximum 56.5 km/h), Medium (76.6 km/h), High (97.4 km/h), and Extra High (131.3 km/h). The critical point is this: the test is now more tied to the vehicle itself. Different equipment variants of the same model produce different results with different mass and aerodynamic values. Therefore, manufacturers must list the WLTP value appropriate for each equipment variant they sell.
Highlights
- The NEDC cycle lasts 20 minutes / 11 km; WLTP 30 minutes / approximately 23 km
- The transition to WLTP increased reported vehicle CO2 values by an average of 21-25%
- The conversion coefficient from NEDC to WLTP for electric vehicle ranges is approximately 0.85
- WLTP is still a laboratory test: in real-world use, the range usually comes out 10-30% lower
- Plug-in hybrids can consume approximately 3.5 times more fuel on real roads than WLTP suggests
Why Was a Fundamental Change Needed After Dieselgate?
The period in which the transition to WLTP accelerated was no coincidence. When it was revealed that Volkswagen had violated the Clean Air Act by installing cheat devices (defeat devices) in approximately 590,000 diesel vehicles of the 2009-2016 model years in the US, NOx emissions in the relevant Jetta and Passat models were measured to reach up to 35 times the legal limits. This scandal was read not merely as one manufacturer's mistake, but as a questioning of the laboratory-based structure of the type approval system. The UK Parliament's 2016-17 session report also revealed that the transition to WLTP required addressing a range of issues, from vehicle taxation to type approval.
The transition alone was not deemed sufficient. RDE (Real Driving Emissions) was added alongside WLTP: a driving test that measures NOx and particulate emissions on the road, in real traffic, for 90-120 minutes. The division of labor between the two is clear: WLTP was tied to the CO2 emission targets regulation; RDE was tied to the Euro 6 regulation. In other words, WLTP took on the comparability of consumption and CO2, while RDE took on the real-road monitoring of exhaust pollutants.
Why Do WLTP Values Always Come Out Higher?
A longer, faster test that more honestly accounts for the vehicle's actual mass naturally produces higher consumption and emission values. The figures confirm this: The transition to WLTP increased reported CO2 emissions in passenger vehicles by an average of 21-25%. Depending on the measurement, the WLTP/NEDC CO2 ratio is in the range of 1.19-1.27; for hybrid electric vehicles, this ratio comes out noticeably higher than for internal combustion vehicles, at around 1.33. It is also consistent that the WLTP effect is stronger in Euro 6 compliant vehicles than in Euro 4 and Euro 5: a cleaner vehicle benefits less from how close the test is to reality.
There is a practical rule for electric vehicles: to convert NEDC range to WLTP, a coefficient of approximately 0.85 is used. A 535 km NEDC range corresponds to approximately 444 km WLTP range. In addition, for China's CLTC cycle the coefficient is approximately 0.82, while for the US EPA value it is approximately 1.88 in the opposite direction; that is, an EPA range appears significantly higher on the WLTP scale. When comparing the figures of different cycles, these coefficients are the most practical way to clarify which value belongs to which scale.
For older vehicles approved in the NEDC era, the situation is different: these vehicles can be given converted WLTP values produced through mathematical conversion. This does not mean the vehicle was retested and does not provide a definitive measurement.
Impact on Tax Brackets: Who Pays What and Why?
WLTP's effect on taxation stems from the prevalence of CO2-based taxes. Since the values are higher (and more realistic), the same vehicle may shift into a higher CO2 band under WLTP, and its tax bracket may change. The Vehicle Excise Duty bands in the United Kingdom are a typical example: WLTP produces a higher CO2 value in g/km for the same vehicle than NEDC, and this value affects band assignments. When Luxembourg switched to CO2 taxation, it was calculated that the more realistic results meant on average 24–31% higher emissions.
There is also a balancing view: It is argued that the transition to WLTP should not increase consumers' tax costs, and that the vehicle's real performance is not affected by the new test. The reconciliation of these two approaches lies here: WLTP alone does not raise taxes; if the tax regulation is tied to CO2, more realistic values may automatically push the vehicle into a higher band. This effect became more visible in company vehicles, because taxation in this segment is directly tied to the CO2 value.
WLTP Is Also a Laboratory Test: Why Are Real-World Figures Still Different?
This is the most critical point: WLTP is more realistic, but it is not a real street test. The test is conducted at 23°C with heating and air conditioning turned off; it does not fully represent motorway and cold weather conditions. In real use, range typically comes out 10–30% lower. In independent winter tests conducted in Norway at temperatures between 0°C and -10°C, range came out 10–23% lower than WLTP; but improvements are recorded every year as generations change.
The biggest gap in plug-in hybrids
WLTP's toughest exam was given in plug-in hybrids (PHEVs). The European Union's comprehensive real-world analysis showed that these vehicles consume about 3.5 times the fuel that WLTP suggests. The reason is measurable: in private use, vehicles run in electric mode only 45–49% of the time, while company vehicles run in electric mode only 11–15% of the time; the electric-continuous engine balance assumed by the test is not achieved on the road. This finding triggered a Utility Factor update to be applied from 2025 onward. In other words, PHEV consumption values are being recalibrated with a less favorable optimism factored in.
Another small but concrete detail about electric vehicles: WLTP consumption also includes charging losses; that is, it measures the energy drawn from the grid, and losses are typically 7–12%. The consumption shown on the dashboard does not include these losses. When you put the two figures side by side, part of the difference comes not from the vehicle's inefficiency but from the difference in the measurement point.
So Which Value Should You Trust?
The clear answer to the question depends on the context. To compare vehicles with one another, WLTP is the most consistent scale available today: same procedure, same conditions, values sensitive to equipment. To make your own budget and range plan, however, no laboratory value alone is enough; climate control, hilly terrain, aggressive driving and winter conditions - every point where you deviate from the test's ideal conditions widens the gap. Nothing is expected to replace WLTP; the natural variability of real-world data alone is not suitable as a legislative standard. The expectation is a gradual improvement of the test through steps such as the RDE and Utility Factor updates.
The global picture is not uniform yet either: In Europe, WLTP has been the legal standard since 2017; the US uses the EPA, China the CLTC, and India the ARAI. Chinese manufacturers can still choose NEDC or CLTC when declaring range - whichever cycle gives the highest, market-friendly figure. So the first question to ask when reading a range figure in a brochure is not the number itself, but which test cycle it was produced with.
Sources
- Explaining NEDC vs WLTP | SEAT UK
- WLTP Explained | EVDB NZ
- Why Your EV Will Never Hit Its WLTP Range (And Why That's OK)
- Learn About Volkswagen Violations | EPA
- Ten Years After Dieselgate | ICCT
- Effect on the type-approval CO2 emissions of light-duty vehicles | JRC
- Global WLTP roll-out Q&A | VDIK
- Emission Standards: Europe: Cars and Light Trucks | DieselNet
- WLTP and the new CO2 tax for drivers | Foyer
- Taxation: will WLTP affect how much car tax I pay? | WLTPfacts.eu