Firing Order: The Pattern That Keeps the Engine Balanced

When you first start a four-cylinder engine, there are four separate explosions per revolution of the crankshaft, and they are not all at once but spaced exactly 180 degrees apart. Most engines write that order as 1-3-4-2. So why not 1-2-3-4? Although the sequence of cylinder numbers may look like a randomly chosen code, it is the result of a deliberate engineering decision that determines everything from the engine's vibration to the load placed on the crankshaft's bearings. In this article, we explain step by step how the firing order is chosen, which orders are used in four- and six-cylinder layouts, and what an incorrect firing order costs an engine.
What Is Firing Order and What Does It Determine?
The firing order is the order in which the cylinders ignite in an internal combustion engine. Each number represents a cylinder number: The notation 1-3-4-2 means that after the first cylinder, the third, then the fourth, and finally the second fire. In gasoline engines, this order corresponds to the order in which the spark plugs produce a spark; in diesel engines, it corresponds to the order in which fuel is injected into each cylinder. In a four-stroke engine, the timing of the valves opening and closing is also designed according to this order.
Cylinder numbering is itself a matter of convention. In inline engines, numbers generally increase from the front of the engine to the back, and cylinder number one is at the front. In V engines, there are two different approaches: some manufacturers number each cylinder bank sequentially on its own, while others number continuously according to the firing order. The numbering logic can even change between two different engines from the same manufacturer; therefore, when reading a firing order, you need to look at the engine's numbering scheme.
So who determines this order? The answer lies at the heart of the design: what determines the firing order is the layout of the crankshaft, especially the crank pins. The angular position of the pin connecting each piston to the crankshaft fixes when that piston reaches top dead center. The firing order is written on top of this physical reality; without changing the shape of the crankshaft, the order cannot be changed arbitrarily. The firing order is a consequence, and at the same time a summary, of the crankshaft design that gives the engine its shape.
The 720-Degree Rule: The Price of Evenly Spaced Firing
In a four-stroke engine, the crankshaft must make two full revolutions, that is, 720 degrees, for each cylinder to complete its power stroke. No matter how many cylinders there are, these 720 degrees are divided among the cylinders. In a six-cylinder engine, the interval between each firing is 120 degrees; in a four-cylinder engine, it is 180 degrees. This evenness is no coincidence: evenly spaced firing means a smoother engine sound, less vibration, and, in turbocharged engines, an even distribution of the exhaust pressure pulses reaching the turbine wheel.
When the intervals are not equal, the result is felt even by ear. Engines with uneven firing intervals produce a noticeably dull, growling exhaust note and spread more vibration. This is precisely the main reason engineers stagger the firing order: to ensure that torque pulses are distributed to the crankshaft as evenly and as balanced as possible. Each explosion's torque pulse on the crankshaft is a blow; when these blows are evenly spaced and ordered, the crankshaft transfers the load to its bearings in a regular manner.
Highlights
- In a four-stroke engine, the firing interval is 720 degrees divided by the number of cylinders: 120 degrees for six cylinders, 180 degrees for four cylinders.
- It is the arrangement of the crank pins that determines the firing order; the order cannot be chosen independently of the crankshaft design.
- In inline-6 engines with the 1-5-3-6-2-4 order, first and second order forces are naturally balanced.
- The firing order affects the distribution of torque pulses; it does not change the mass balance unless the crankshaft changes.
Which Orders Are Used in Four and Six Cylinder Configurations?
Established firing orders exist for common engine layouts, and behind each lies a specific balance calculation. The overwhelming majority of inline-4 engines use the 1-3-4-2 order; some British-built engines, on the other hand, preferred the 1-2-4-3 order. The elegance of the 1-3-4-2 arrangement is this: the first and fourth, and the third and second cylinders never fire side by side. The firings are distributed by jumping back and forth along the cylinders, and the load each explosion places on the crankshaft is spread along the bearings.
The classic order of the inline-6 engine is 1-5-3-6-2-4. This order is also the key to why the inline-6 is one of the smoothest engine layouts in history: in this crankshaft arrangement, first and second order forces are balanced; the engine's natural smoothness comes from this arrangement of six cylinders. In inline-5 engines, the 1-2-4-5-3 order was chosen to minimize the rocking couple vibration that five cylinders inevitably produce. In three-cylinder engines, there is in fact no difference between 1-2-3 and 1-3-2; since the cylinder count is low, both orders give the same behavior.
| Layout | Typical Firing Order | Note |
|---|---|---|
| Inline-3 | 1-2-3 or 1-3-2 | No actual difference between the two orders |
| Inline-4 | 1-3-4-2 | 1-4 and 3-2 never fire as neighbors |
| Inline-5 | 1-2-4-5-3 | To reduce rocking vibration |
| Inline-6 | 1-5-3-6-2-4 | First and second order forces are balanced |
| 60° V6 | R1-L1-R2-L2-R3-L3 | Cylinder banks fire alternately |
| 90° V6 | R1-L2-R2-L3-L1-R3 | Different order options are available |
The V6 layout is a good example of how the order changes with structural choices. Same number of cylinders, same timing math; but different orders arise depending on the angular design of the crankshaft and the arrangement of the banks. In V8, V10 and V12 engines, there are even more valid orders, and the order can change even between two engines from the same manufacturer. Ford's 302 engine uses the 1-5-4-2-6-3-7-8 order, while the longer-stroke 351 engine switched to the 1-3-7-2-6-5-4-8 order from 1969 onward; because the long stroke created harmonic vibrations that were unacceptable in the old crank arrangement. This example shows that the firing order is not a catalog detail, but a tool of vibration control.
Does It Reduce Vibration, or Merely Distribute It?

A common mistake needs to be corrected here. The firing order affects the engine's vibration output in two different ways, and these ways should not be confused with each other. The first is the distribution of torque pulses: the timing of the explosions on the shaft determines the pattern of the loads on the main bearings and the shaft's bending behavior. A distribution with a wrong pattern accumulates uneven loads on the crankshaft and the bearings. The second is the engine's mass balance: the first- and second-order inertia forces arising from the pistons and connecting rods.
The critical distinction is this: as long as the shape of the crankshaft stays the same, changing the firing order does not change the engine's mechanical mass balance. Balance depends on the geometry of the moving masses; the firing order, on the other hand, depends on the combustion timing. The sequence regulates how the torque pulses are distributed on the shaft, but it cannot eliminate the vibration forces produced by the pistons. That is why the smoothness of the inline-6 comes not from its order, but from the crank geometry that makes that order possible. The two work together: the crank arrangement balances the masses, the firing order balances the combustion loads.
There is also a trade-off between these two in design. For example, a crank arrangement may offer even firing intervals while weakening the primary balance; an alternative arrangement improves balance but makes the firing uneven. The engineer tunes these two ends together, keeping in mind the engine's usage profile and its noise-vibration targets. In engine development, choosing the optimal firing order is a design decision in its own right from a vibration standpoint.
The Balance Shaft Connection: Who Compensates for the Forces Left Over?
For the forces that the firing order and crank geometry cannot balance, engines are additionally fitted with balance shaft systems. Balance shafts are rotating shafts carrying eccentric weights that cancel the unbalanced dynamic forces in the engine in opposite phase. Their most classic area of use is four-cylinder engines: in an inline-4 arrangement, the secondary forces arising from the pistons' motion cannot be eliminated by crank design, and these forces produce that characteristic vibration felt under the seat, especially at high rpm. Balance shafts target precisely these secondary forces.
The balance shaft system works in coordination with the vibration pattern created by the firing order. The rotational speed and phase of the shafts must be synchronized with the engine's crank angle and combustion rhythm. In other words, the firing order is one of the design inputs for the balancing components; they are so intertwined that they cannot be considered independent of each other. Although the 1-3-4-2 sequence in a four-cylinder engine looks at first glance like merely an arrangement of spark plug wires, behind it lies a holistic calculation involving crank angles, force vectors and balance shaft phases.
What Does an Incorrect Firing Order Do to an Engine?
Connecting the spark plugs or injectors in the wrong order is the most commonly encountered scenario in practice, and its symptoms appear immediately. The engine either does not start at all or runs very poorly: hiccups at idle, backfiring through the intake manifold, bangs in the exhaust muffler. The mechanism is simple: the spark goes to a cylinder that does not have an air-fuel mixture ready to burn; when the valves open and close at the wrong time, unburned fuel escapes into the exhaust and ignites there. The result is a rough running with misfires and backfires occurring together.
But is there a risk of permanent damage? A measured approach is needed here. An incorrect sequence does not instantly create catastrophic damage in the engine; since crank synchronization is independent of the piston and valve mechanical linkage, the pistons do not collide with each other. Common experience is that the engine either does not run at all or runs with backfiring. However, if the engine continues to be run in the wrong order, the risk grows: constant misfires, unbalanced loads and the flow of unburned fuel can, in the long run, lay the groundwork for problems that could escalate to valve and piston damage; therefore, the engine must be stopped as soon as it is detected running. In short, an incorrect firing order is an urgent fault alarm and cannot be tolerated for prolonged running.
Summary: The Sequence Is Not Just a Code, It Is the Very Essence of Balance
The answer to how the firing order keeps the engine balanced is gathered in three layers. First, mathematics: in a four-stroke cycle, 720 degrees are divided into intervals equal to the number of cylinders, and this equality provides the smooth sound, the low vibration, and the order of exhaust pulses reaching the turbine in turbocharged engines. Second, mechanics: the placement of the crank pins determines the sequence, and correct ordering makes it possible for torque pulses to load the main bearings regularly - that is, for the shaft to run without bending and fatigue. Third, cooperation: balance shafts cancel out, in opposite phase, the forces that the firing order and crank geometry alone cannot resolve.
When these three layers work together, the difference in smoothness between a four-cylinder family car and a six-cylinder engine becomes clear as a measurable engineering result, not a magic touch. And the next time you see 1-3-4-2 written on an engine cover, there will stand not a random code, but a summary of the decisions that determine that engine's vibration, sound and lifespan.
Sources
- Firing order - Wikipedia
- Balance shaft - Wikipedia
- Engine Fire Order: Definition, Importance, and Various Advantages - Testbook
- Understanding Engine Firing Order for Your Vehicle - JEGS
- Engine Configuration and Smoothness - AutoZine
- Firing Order Selection in Relation to Vibration Aspects - ResearchGate
- Why aren't even firing orders always the best option? - Reddit r/AskEngineers
- Symptoms of a Wrong Firing Order - eHow