HP, PS and kW: Why Are Horsepower Units Different?

When you look at a car's spec sheet, you sometimes see 300 hp, sometimes 296 PS, sometimes 220 kW for the same engine. The numbers differ, but the engine is the same engine. The reason for the difference is simple: there is no single definition of horsepower, and different markets around the world prefer different units. Moreover, whether the measurement is made at the crankshaft or at the wheels changes the number far more than the unit debate does.
On this page, we will cover the origins of the HP, PS and kW units, how they convert to one another, how power is calculated from torque and engine speed, and why dynamometer measurements give different results, all in a single logical chain. By the end of the article, you will be able to read the figures in spec sheets correctly and confidently compare the power of two vehicles.
Where Does Horsepower Come From?
Horsepower is a unit of measurement for power, that is, the rate at which work is done, and typically describes the output of engines. The term was adopted in the late 18th century by the Scottish engineer James Watt. Watt's aim was not the gasoline engine, but to compare the output of the steam engine with draft horses: he wanted to market it by showing how many horses' worth of work the steam engine performed in place of one horse.
Watt determined that a horse at the mill could turn the mill wheel 144 times per hour, that is, 2.4 times per minute. The wheel had a radius of 12 feet, and he assumed the horse exerted 180 pound-force, roughly 800 newtons of force. The experimental value of 32,400 ft·lb/min from 1782 was standardized by Watt and Matthew Boulton the following year as 33,000 ft·lb/min, that is, 550 ft·lbf/s. The unit we today call imperial or mechanical horsepower is based on exactly this figure.
An interesting fact: the horse itself can exceed this figure. According to calculations based on the 1925 Iowa State Fair measurements, a horse can produce 14.88 hp, that is, 11.10 kW, as peak power for a few seconds; in contrast, the sustainable workload is around 1 hp per horse, that is, about 0.75 kW. Although Watt's value was a marketing measure, it reasonably corresponds to a horse's sustained average performance.
Highlights
- 1 mechanical hp = 745.7 W; 1 PS = 735.5 W; the difference is about 1.4%
- 1 kW = 1.34102 hp = 1.35962 PS
- Power formula: HP = (Torque × RPM) / 5252 (torque in lb·ft)
- Power at the wheels is typically 10-15% lower than crank power
- In 1972, PS was replaced by the kilowatt as the official unit in Europe
HP, PS and kW: What Is the Difference Between the Three Units?

At the root of the confusion lie two different definitions of horsepower. Imperial, that is, mechanical hp, equals approximately 745.7 watts; the exact value is 745.69987158 W. PS, the metric horsepower, on the other hand, is approximately 735.5 watts, exactly 735.49875 W. PS corresponds to 98.6% of imperial horsepower; the difference between them is roughly 1.4%.
The definition of PS is given clearly in the DIN 66036 standard: 1 PS is the power to lift a mass of 75 kg 1 meter per second against Earth's gravity, that is, 75 kgf·m/s. PS is actually an abbreviation: The German Pferdestärke, meaning horsepower. The same unit lives under different abbreviations in different languages: Italian cavallo vapore (cv), French cheval-vapeur (ch), Swedish hästkraft (hk), Dutch paardenkracht (pk), Polish koń mechaniczny (KM). All of them refer to the same metric horsepower, and CV is the exact equivalent of PS.
The kilowatt, on the other hand, is the unit of power in the SI system and carries international official status. In 1972, PS was replaced by the kilowatt as the official power unit in the EEC directives of the time. Under EU Directive 80/181/EEC, in force since January 1, 2010, horsepower can only be used in the European Union as a supplementary unit. In the European Union, the power of vehicles is specified in kW on their registration documents; hp is not stated. With the spread of electric vehicles, kW has de facto become the universal standard; in electric motors, watt and kW indicate shaft output power on nameplates, except for the use of hp in the US.
Conversion Table: Comparison of kW, hp and PS
The conversion factors between them are as follows: 1 kW = 1.34102 mechanical hp = 1.35962 PS. Conversely, 1 hp = 0.7457 kW and 1 PS = 0.7355 kW. For practical use, here is a quick reference table:
| kW | hp (mechanical) | PS (metric) |
|---|---|---|
| 75 | 100.6 | 102.0 |
| 110 | 147.5 | 149.6 |
| 150 | 201.2 | 203.9 |
| 200 | 268.2 | 271.9 |
| 300 | 402.3 | 407.9 |
The practical conclusion from the table is this: engines physically produce flat kW values; such as 110, 150, 200, 300 kW. That is why figures written in hp or PS become odd numbers that are not multiples of 5 or 10. A 150 PS engine is 110 kW, and if expressed in mechanical hp it is approximately 148 hp; the 1.4% difference is small, but it becomes clearly visible in three-digit figures.
Which Market Uses Which Unit?
bhp is used in the United Kingdom, mechanical hp in the US. Almost all European car manufacturers work with PS; Germany, Australia and New Zealand, however, prefer kW even for internal combustion engines. For this reason, the same engine is announced with different figures in different markets. A designation like the Volkswagen group's 150 TSI means 150 hp/PS and corresponds to 148 in mechanical hp; in some publications it is incorrectly written as 150 bhp, which actually corresponds to 152 hp. When making comparisons, the rule is simple: compare hp with hp, bhp with bhp; comparing with mixed units is misleading.
How Is Power Calculated from Torque and RPM?
Power alone does not describe an engine's character; it must be read together with torque and rpm. There is an exact mathematical relationship between power and torque, expressed by the standard SAE formula: HP = (Torque × RPM) / 5252, with torque in lb·ft. The constant 5252 in the formula is the rounded result of dividing 33,000 ft·lbf/min by 2π; when torque is given in inch-pounds, the constant becomes 63,025.
A concrete example: if an engine produces 200 lb·ft of torque at 5,250 rpm, its power at that point is exactly 200 hp. The logic of the formula can also be used by converting torque to N·m: to convert lb-ft to N·m, it is multiplied by 1.356; 100 Nm = 73.8 lb ft, 300 Nm = 221 lb ft. The most important practical consequence of this relationship is: the engine that can produce the same torque at higher rpm is the more powerful engine. Because power is the product of torque and rpm.
Power and torque do different jobs in a vehicle. Power is the quantity that determines how fast a car accelerates and, especially, its top speed; torque, on the other hand, is a measure of how flexibly the engine can operate across a wide rpm range. Peak power always arrives at a higher rpm than peak torque: in an engine producing 200 hp at 6,000 rpm, if torque peaks as early as 1,500 rpm, the car feels flexible at low revs. To make it concrete with examples: city cars typically fall in the range of 75-150 hp and 200-250 Nm; the hot hatch class offers 280-300 hp and 350-420 Nm; V8 performance sedans offer 500-600 hp and 700-850 Nm; super cars are in the 700-800 hp range, with some torque-focused models reaching 900 Nm, and some electric vehicles delivering over 1000 hp and torque above 2000 Nm. Turbo diesels produce very high torque, and supercharged gasoline engines deliver more than naturally aspirated ones; electric motors deliver torque instantly, from zero rpm. Indeed, at a steady 70 mph highway cruise, the engine uses only 10-20 hp of its power. Even so, the common claim that torque matters more than power in spec sheets is not exactly correct; the two are linked by the formula, and acceleration is determined by both together.
Crankshaft Power or Wheel Power? The Measurement Difference
Converting units correctly is only half the story. Even two figures expressed in the same unit carry different meanings depending on the measurement point. BHP, or brake horsepower, is the power measured at the engine's flywheel, including the engine's own internal friction losses. It takes its name from a large water-brake test rig that measures braking force while the engine spins at the desired rpm.
There are two basic measurement methods. An engine dynamometer removes the engine from the vehicle and measures it under laboratory conditions, giving flywheel, i.e. crankshaft, torque. A chassis dynamometer, on the other hand, places the car on rollers with its wheels and measures the power reaching the wheels, i.e. WHP. The difference between them is the power lost while passing through the drivetrain, i.e. the transmission, driveshaft and differential. In power target calculations, assuming a 10% loss for front-wheel-drive cars and 15% for rear-wheel-drive cars is a common approach: wheel power is multiplied by 1.1 or 1.15 to arrive at crankshaft power. In all-wheel-drive systems the loss is even greater; a vehicle producing 400 hp at the flywheel may show 320-340 hp on the dyno as front- or rear-wheel drive, or 300-320 hp as all-wheel drive. The general consensus is that the loss from flywheel to wheels ranges between 10% and 25%.
There is also a measurement difference between markets. In the US, hp is measured without leaving certain auxiliary components attached, such as the power steering pump; meaning there is less parasitic loss, and therefore US hp figures are higher than the bhp values measured in the United Kingdom. The difference is roughly a factor of 1.01 and becomes noticeable in three-digit figures.
Why Don't Manufacturer Figures Match Dyno Measurements?
The horsepower values manufacturers state are crank values, measured on an engine dyno under controlled laboratory conditions. When you take your car to a chassis dyno, however, you measure wheel power; it is normal to see a difference of around 15% between the power the manufacturer claims and the wheel power. When comparing a dyno result with manufacturer data, the most common mistake in interpretation is failing to account for this difference.
Dyno results are also variable in themselves. In measurements taken with the same car on different dynamometers, on different days and at different altitudes, differences of 40-50 hp and 20-75 lb·ft can be observed. The practical criterion for a dynamometer to be considered accurate is this: when a standard car is measured, if the result deviates from the manufacturer's specification by more than 2-3%, the dynamometer should be considered suspect. In low-powered cars especially, an important reason for the apparent percentage difference between dynos is incorrect measurement of parasitic loss. Some tuners use a rule of thumb assuming roughly 15-20% loss to estimate crank power from chassis dyno results; but the crank outputs the software produces as estimates should be approached with skepticism. If the dynamometer measurement is done correctly, it is a reliable tool; but trusting a number without knowing the type of dyno, the estimation method of the software used and the loss modeling is misleading.
In short: What Is the Difference Between HP, PS and kW?
The clear one-sentence answer is this: HP, PS and kW are different units of the same physical quantity, namely power; 1 mechanical hp = 745.7 W, 1 PS = 735.5 W and 1 kW = 1.34102 hp = 1.35962 PS, so the same engine's power appears as slightly different figures depending on which unit it is written in. The source of the difference is the unit definition, not the engine itself.
Three checks are enough when reading a technical table. First, know the unit: hp is mechanical, PS is metric, and kW is the SI unit, with a difference of roughly 1.4% between them. Second, ask about the measurement point: manufacturer figures are crank values, while wheel power measured on a dyno is typically 10-15% lower. Third, make comparisons in the same unit and at the same measurement point: compare hp with hp, and wheel power with wheel power. These three rules are enough to read the figures in technical tables correctly.
Sources
- Horsepower - Wikipedia
- What Is Horsepower? BHP, kW And PS Explained
- What's The Difference Between BHP, HP, PS and kW?
- Engine Power Converter - PS vs BHP vs kW, Exact Factors
- Crank Vs Wheel Horsepower And Why It Matters - Garrett Motion
- Here's Why You Shouldn't Trust Dyno Numbers - Road & Track
- Torque to hp Calculator - Omni Calculator